TO SANITIZE AND DISINFECT: Pre-clean surface. Hold can upright 6" to 8" from surface. Spray 3 to 4 seconds until covered with mist. To sanitize: Surfaces must remain wet for 10 seconds then allow to air dry. To disinfect: Surfaces must remain wet for 3 minutes then allow to air dry. Use on hard, non-porous surfaces Pre-clean surfaces prior to use. Hold can upright 6 to 8 inches from surface. Spray 3 to 4 seconds until covered with mist. Rinse toys and food contact surfaces with potable water after use. To disinfect: Surfaces must remain wet for 3 minutes then allow to air dry. For Norovirus surfaces must remain wet for 10 minutes then allow to air dry To sanitize: Surfaces must remain wet for 10 seconds then allow to air dry. To control and prevent mold and mildew: Apply to pre-cleaned surface. Allow to remain wet for 3 minutes. Let air dry. Repeat applications in weekly intervals or when mold and mildew growth appears. To deodorize: Spray on surfaces as needed. To spot sanitize soft surfaces: Spray until fabric is wet. DO NOT SATURATE. Fabric must remain wet for 30 seconds. Let air dry. For difficult odors, repeat application. |